Sunbeam 4816-8 Assembling Your Oskar¨ Jr. Chopper Plus, Using Your Oskar¨ Jr. Chopper Plus

Assembling Your Oskar¨ Jr. Chopper Plus

Before you begin, please BE SURE THAT THE ELECTRIC CORD

IS UNPLUGGED.

Set up the motor base facing you on a dry, level surface with the tallest side of the motor housing to the rear. NOTE: An "ON" and "OFF" switch is located on the back of the motor base.

Place the clear Container over the drive shaft on the motor base and rotate the Container until it drops down evenly on the base. Now turn the Container counter-clockwise until it locks firmly into position.

Place the Chopping Blade over the drive shaft, rotating it slightly until it drops into place. THE BLADE IS EXTREMELY SHARP. USE CAUTION WHEN HANDLING THIS BLADE.

To attach the cover, place the cover on the container so that the large locking tab of the Cover is to the right-hand side near the horizontal slot at the back of the motor base. When turned counter-clockwise, the tab will engage the automatic switch and the Oskar® Jr. Chopper Plus will turn ON. By moving

the Cover in the opposite direction it will turn OFF.

Using Your Oskar¨ Jr. Chopper Plus

Pulsing techniques:

The Oskar® Jr. Chopper Plus processes food very quickly; in most cases, in seconds! Therefore, foods can easily become over processed if you don't watch carefully. We suggest that when using the unit, you chop foods no more than a few seconds at

a time. Turn the cover ON and OFF frequently until the desired results are obtained. To use this "Pulsing Technique," simply rotate the cover so that the locking tab moves in and out of the automatic switch slot. Pulsing ensures excellent results every time.

4