2
3
Wall Mount Models
Rotate back of unit counterclockwise 1/ 4-turn. Carefully thread swivel ball onto the end of
the shower arm, over the Teflon tape, and hand tighten a s firmly as possible.
NOte: should additional tightening be necessary, cover the
swivel ball with a soft clot h, to prevent Marring and
tighten with pliers
do not turn More than 1/4 t urn.
Position your Sunbeam showerhead as de sired and tighten back of unit. Slowly turn on
cold water and check for leaks. If lea ks occur, wrap a soft cloth around the swivel ball and
re-tighten with pliers. DO NOT OVER TIGHT EN.
operatIng InstructIons To select a setting, turn the selector tab to th e desired position. The selector tab will align
with the red symbol designating which set ting you have chosen.
Spray/Massag e Bubble
Massage Massage/Bu bble
Full Spray Spray Mist
Spray Bubble Mist
care & cleanI ng
If you notice a drop in water pressure or skewing of wate r streams, place unit in a vinegar
solution (1 part vinegar to 3 parts wate r). Allow to soak overnight. Remount showerhead
and run cold water through it for several minutes.
Backside
Swivel Ball