Care and Cleaning OF YOUR WARMING PRODUCT
We recommend washing before initial use.
Before Washing or Storing Your Warming Product:
1Disconnect power cord from wall BEFORE detaching control cord from the warming product.
2Ensure that no cords are still connected and none of the wires have worn through the fabric.
3Carefully follow all washing instructions or your warming product may shrink and possibly cause a fire hazard.
•DO NOT submerge control in water.
•DO NOT dry clean your warming product. Dry cleaning solvents may damage the wires.
•DO NOT use bleach or cleaning fluids.
•DO NOT use a wringer.
•DO NOT iron your warming product.
•DO NOT use mothballs or sprays of any kind.
•DO NOT reconnect the warming product or use it until it is COMPLETELY dry.
•DO NOT wash or put into water the power cord or any of the product’s cords.
Taking care of your warming product is easy and safe as long as you follow a few simple steps. Machine Washing
1Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and lukewarm water.
2Wash in mild soap and lukewarm water on the “delicate” or “gentle” cycle in the washer for two minutes. Remember, do not use bleach.
3Rinse in fresh, lukewarm water.
4Spin dry in the washing machine. Then gently stretch to its original size.
Machine Drying
Caution: Do not use commercial dryers or the dryers at your local Laundromat.
They get too hot and would damage the wiring of the warming product.
1Preheat the dryer on the “low” temperature setting for 2 minutes.
2Place blanket/mattress pad/throw into the dryer and tumble dry for 10 minutes at a low temperature.
3Remove the blanket/mattress pad/throw while it is still damp and gently stretch it to its original size.
4Drape the warming product over a clothesline or a shower rod. DO NOT use clothespins.
5Warming product must be COMPLETELY dry before reconnecting the power plug or control plug.
Hand Washing
1Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and lukewarm water.
2Gently squeeze the soap suds through a few times.
3Rinse in fresh, lukewarm water.
Hand Drying
1Gently stretch the blanket/mattress pad/throw back to its original size.
2Drape the warming product over a clothesline or hang over a shower rod. DO NOT use clothespins.
3Warming product must be COMPLETELY dry before reconnecting the power plug or control plug.
For questions or support, please visit: www.sunbeam.com
