Sunbeam EM0480 manual Operating your Café Series Conical Burr Coffee Grinder

Operating your Café Series™ Conical Burr Coffee Grinder (continued)

8.To grind coffee, flip the switch to the ‘On’	11. Flip the switch to the ‘Auto’ position, see
position, see figure 4.	figure 6.
Figure 4

	Figure 6
9.When the desired amount of coffee has	12. To grind coffee, press the group handle
been ground, flip the switch to the ‘Off’	against the button located in the centre
position. Remove the coffee container and	of the group handle locator, see figure 7.
scoop out the ground coffee.

For grinding into the group handle

10. Position the group handle into the group handle locator, see figure 5.

Figure 5

Figure 7

13. When the basket is full, pull the group handle off the button. Collapse the coffee in the basket by tapping it on the bench and repeat until the desired amount of coffee has been ground.

Note: There are two group handle locators provided a smaller size to fit domestic handles and a larger size for commercial handles.

Note: Foreign objects like stones or twigs can sometimes be found in whole bean coffee and can cause the coffee grinder to jam. Should this occur refer to the Care and Cleaning section on page 11 as these objects need to be removed immediately.

8