Sunbeam EM0480 manual Operating your Café Series Conical Burr Coffee Grinder

Operating your Café Series™ Conical Burr Coffee Grinder

Before using the coffee grinder, wipe the base exterior with a damp cloth. Wash the bean hopper, hopper lid and ground coffee container in warm soapy water, then rinse and dry.

Note: Do not immerse the burrs in water or any other liquid.

Note: Do not place any parts of the coffee grinder in the dishwasher.

1.Place the coffee grinder on a dry, level surface.

2.To attach the bean hopper, position bean hopper onto the top of the motor base, push down and turn clockwise.

See figure 1.

6.Select the grind by turning the grind adjustment collar to the desired setting, see figure 2.

Figure 2

Figure 1

3.Fill the bean hopper with coffee beans.

Tip: Remember to keep the hopper full at all times. Having an even weight bearing down on the burrs is important to ensure a consistent grind.

Note: This coffee grinder is intended to grind whole coffee beans only.

4.Place the hopper lid onto the bean hopper.

5.Plug the power cord into a 230-240V AC power outlet and switch the power on.

Refer to the grind setting table on page 9 to assist you in selecting the correct grind level for the desired brewing method.

For grinding continuous quantities

7.Remove the lid from the ground coffee container and slide onto the preparation mat. The coffee container will fit comfortably into the domestic size group handle locator, see figure 3.

Figure 3

7