Sunbeam EM0480 manual Care and Cleaning

Care and Cleaning (continued)

3.Press and hold down the ‘UNLOCK’ button at the rear of the motor base and with the other hand turn the grind adjustment collar anti-clockwise until the graphic arrow on the collar is aligned with the arrow on the motor base, see figure 10.

Figure 12

6.Clean the bottom burr using the burr- cleaning brush, see figure 13.

Figure 10

4.Lift out the top burr from the grind adjustment collar using the handle, see figure 11. Clean using the burr-cleaning brush.

Figure 11

5.Lift the grind adjustment collar away from the motor base and clean with the brush, see figure 12.

Figure 13

7.Once both burrs are cleaned, return the grind adjustment collar to its position in the motor base.

8.With the grind adjustment collar in hand align the arrow on the collar with the arrow on the rear of the motor base, press down.

9.Replace the top burr back into position in the grind adjustment collar and turn clockwise to the desired grind setting.

11