Operating your Café Series® Programmable Conical Burr
Coffee Grinder
Before using the coffee grinder, wipe the base exterior with a damp cloth. Wash the bean hopper, hopper lid and ground coffee container in warm soapy water, then rinse and dry.
Note: Do not immerse the burrs in water or any other liquid.
Note: Do not place any parts of the coffee grinder in the dishwasher.
1.Place the coffee grinder on a dry, level surface.
2.To attach the bean hopper, position bean hopper onto the top of the motor base, push down and turn clockwise.
See figure 1.
Figure 1
3.Fill the bean hopper with coffee beans.
Tip: Remember to keep the hopper full at all times. Having an even weight bearing down on the burrs is important to ensure a consistent grind.
Note: This coffee grinder is intended to grind whole coffee beans only.
4.Place the hopper lid onto the bean hopper.
5.Plug the power cord into a
6.Select the grind by turning the grind adjustment collar to the desired setting, see figure 2.
Figure 2
Refer to the grind setting table on page 13 to assist you in selecting the correct grind level for the desired brewing method.
8
