Care and Cleaning (continued)
3.Press and hold down the ‘UNLOCK’ button at the rear of the motor base and with the
other hand turn the grind adjustment collar
Figure 17
6.Clean the bottom burr using the burr- cleaning brush, see figure 18.
Figure 15
4.Lift out the top burr from the grind adjustment collar using the handle, see figure 16. Clean using the
Figure 16
5.Lift the grind adjustment collar away from the motor base and clean with the brush, see figure 17.
Figure 18
7.Once both burrs are cleaned, return the grind adjustment collar to its position in the motor base.
8.With the grind adjustment collar in hand align the arrow on the collar with the arrow on the rear of the motor base, press down.
9.Replace the top burr back into position in the grind adjustment collar and turn clockwise to the desired grind setting.
15