![Using your MultiChopper Plus continued](/images/new-backgrounds/56691/5669115x1.webp)
Using your MultiChopper Plus continued
7.Plug the power cord into a
8.Hold down the motor housing with one hand and press down on the power button with the other hand to activate the chopper. Use short pulses until the right consistency is achieved.
NOTE: If the ingredients stick to the sides of the jug during chopping, scrape down the sides of the jug with a spatula, then continue chopping.
IMPORTANT: Do not hold the power button down to process continuously for more than
7.5seconds at any one time. When pulsing, the recommended pulse duration is 2 seconds on and 2 seconds or longer off.
9.When you have finished chopping, turn the power off at the power outlet. Remove the motor housing and cover from the jug. Carefully remove the
Using the Whisk Attachment
1.Place the
2.Place the whisk attachment over the shaft in the centre of the glass jug. See Figure 5.
3.Pour liquid to be whipped/aerated into the glass jug.
NOTE: Do not operate the appliance when the jug is empty.
4.Place the
NOTE: Do not operate the appliance if the cover is not fitted securely inside the rim of the glass jug.
5.Place the motor housing on top of the
See Figure 4.
6.Plug the power cord into a
7.Hold down the motor housing with one hand and press down on the power button with the other hand to activate the whisk. Use short pulses until the right consistency is achieved.
NOTE: Scrape down the sides of the bowl with a spatula during the mixing if necessary.
IMPORTANT: Do not hold the power button down to process continuously for more than
����
����
����
����
���
���
���
���
��
��
��
��
�� ��
� ���
Figure 5
7.5seconds at any one time. When pulsing, the recommended pulse duration is 2 seconds on and 2 seconds or longer off.
8.When you have finished whisking, turn the power off at the power outlet. Remove the motor housing and cover from the jug.
5