Sunbeam FP5905 manual Care and Cleaning, Control probe, To clean interior and exterior surface

Care and Cleaning

Always turn the power off and remove the plug from the power outlet after use and before cleaning. Allow appliance to cool before cleaning.

Control probe

If cleaning is necessary, wipe over with a damp cloth.

Note: The control probe must be removed before the frypan is cleaned and the control probe inlet must be dried before the frypan is used again.

Important: Do not immerse the control probe in water or other liquid.

Store the control probe carefully. Do not knock or drop it as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Appointed Service Centre for inspection. Refer to the separate warranty and service centre booklet.

Glass lid

Wash the lid in warm soapy water using a soft sponge, rinse and dry thoroughly Alternatively, wash the lid in a dishwasher.

To clean interior and exterior surface.

•When cleaning the non-stick coating do not use metal (or other abrasive) scourers. After cleaning, dry the frypan and lid with a soft cloth before storing.

•Wash in hot soapy water or in a dishwasher. Remove stubborn spots with a plastic washing pad or sponge.

•The heating element is totally sealed, making the frypan vessel safe to fully immerse in water, or place in a dishwasher.

•Wash as directed, and re-season the frypan before using again. In some instances this may not remove all the staining.

8