Wall mounting your heater
Before using your Euro Plus heater ensure it is securely mounted on a wall.
Wall mounting
For maximum efficiency this heater should be positioned so that the heat generated mixes with the maximum volume of air. It can be installed in any room of the home, including the bathroom, in accordance with the instructions below.
1.Remove the wall mounting bracket from the rear of the heater by squeezing the clips (at A and B in figure 2 below) and pulling towards you.
B
A
Figure 2
2.Select a suitable location to mount the heater, ensuring that it is at least 10cm below any curtains or window furnishings, 10cm from any furniture located to either side, and 75cm from any furniture placed in front of the heater, as shown in figure 3.
The heater must be mounted horizontally, with the control panel at the top.
A
A = 10 cm
B = 10 cm
C = 75 cm
Figure 3
Note: any electrical appliances to be fitted in a bathroom should be installed by a qualified electrician in accordance with Australian/New Zealand Standard Wiring Rules. Portable heaters should not be used in a bathroom.
Heaters that can be permanently fixed must be installed so that any controls cannot be reached by a person using a bath or shower, as shown in figure 4.
60cm | 60cm |
Figure 4
6
