Sunbeam PC7900 manual Using your Stainless Drip Filter, Setting the current time of day on the LCD

Models: PC7900

1 12
Download 12 pages 57.44 Kb
Page 6
Image 6

Using your Stainless Drip Filter

Before using your Stainless Drip Filter for the first time

It is recommended that you clean your drip filter prior to first use by the following:

1.Place the Stainless Drip Filter on a flat, level surface.

2.Add water into the drip filter by opening the water tank lid and filling to the maximum capacity (12 cup) mark.

3.Ensure the filter basket holder and removable mesh filter basket are firmly positioned into place and close the water tank lid.

4.Place the empty carafe into position on the keep warm plate and connect the plug into a 230/240 Volt AC power outlet. The LCD will illuminate and display ’12.00’.

5.Press the ON/AUTO/OFF button once. Water will start to drip through into the carafe.

6.Once all the water has dripped through and the water tank is empty, press the ON/ AUTO/OFF button twice. This will turn the appliance off.

7.Wash the carafe, filter basket holder, removable mesh filter basket and supplied coffee spoon in warm, soapy water and rinse and dry thoroughly and position back into place in the appliance.

Your Stainless Drip Filter is now ready to use.

Setting the current time of day on the LCD

Important: The clock only needs to be set if you are using your Stainless Drip Filter in ‘AUTO’ mode. You do not need to set the clock for the manual operation of your Stainless Drip Filter.

1.Place the Stainless Drip Filter on a flat, level surface.

2.Connect the plug into a 230/240 Volt AC power outlet. The LCD will illuminate and display ’12.00’.

3.Press the PROGRAM button once. The screen will display ‘SET CLOCK’.

4.Press the HOUR button until the correct number of hours is displayed. You can hold the button down to scroll through the numbers quickly.

5.Then press the MIN button until the correct number of minutes is displayed. You can hold the button down to scroll through the numbers quickly.

Note: The time is displayed based on 24-HOUR digits.

6.Once you have set the desired time, either press the PROGRAM button twice to set, or wait 10 seconds until the MIN button stops illuminating.

5

Page 6
Image 6
Sunbeam PC7900 manual Using your Stainless Drip Filter, Before using your Stainless Drip Filter for the first time