Using your Eco Jet continued
Fitting the attachments
Before removing any attachment, ensure the plug is disconnected from the power outlet. Always allow the unit and the attachment to cool completely before handling.
Fitting the standard nozzle
1.Attach the standard nozzle to the Eco Jet by pushing it onto the steam outlet, aligning the arrow engraved on the attachment with the join line above the steam outlet. Turn the attachment in the direction of the arrow until it locks into place and the arrow on the attachment aligns with the double line marked on the side of the steam outlet.
2.To remove the standard nozzle, twist the attachment back against the direction of the arrow. When the arrow engraved on the attachment is aligned with the join line above the steam outlet, pull the attachment firmly to remove.
Fitting the utility head and fabric cloth
1.Fit the fabric cloth to the utility head by stretching the elasticised cloth over it, ensuring it is evenly fitted and quite snug.
Note: Do not use the utility head without a cloth attached as this may cause damage to surfaces.
2.Attach the utility head with cloth to the Eco Jet by pushing it onto the steam outlet aligning the arrow engraved on the attachment with the join line above the steam outlet. Turn the attachment in the direction of the arrow until it locks into place and the arrow on the attachment aligns with the double line marked on the side of the steam outlet.
Note: When cleaning large areas the cloth may become quite wet and/or dirty. Switch the unit off at the outlet, wait for the attachment and the cloth to cool completely before removing the cloth to rinse, wring out and replace. Alternatively replace with a clean, dry cloth.
3.To remove the utility head, twist the attachment back against the direction of the arrow. When the arrow engraved on the attachment is aligned with the join line above the steam outlet, pull the attachment firmly to remove.
Fitting the utility head and squeegee
The squeegee works in conjunction with the utility head and needs to be attached to it before being mounted to the unit.
1.Fit the squeegee to the utility head by aligning the hooks on the squeegee with the holes on the utility head.
2.Push the top of the utility head down so that it is secured under the clip on the top of the squeegee.
3.Attach the utility head with squeegee to the Eco Jet by pushing it onto the steam outlet aligning the arrow engraved on the attachment with the join line above the steam outlet. Turn the attachment in the direction of the arrow until it locks into place and the arrow on the attachment aligns with the double line marked on the side of the steam outlet.
4.To remove the squeegee from the utility head lift the clip on the top of the squeegee up and pull away from the utility head.
9
