Care and Cleaning
After each use
1.Remove the plug from the power outlet.
2.Remove any remaining steam from the water tank by depressing the steam trigger until the tank is completely empty.
3.Partially unscrew the water cap, waiting 5 minutes for any remaining steam to escape and to allow the unit to cool down. Proceed to completely unscrew the cap.
4.Carefully empty any remaining water from the water tank by turning it upside down above a sink or outdoors.
Caution: Water may be extremely hot.
5.Once completely cooled, store the Eco Jet in a cool, dry location.
Cleaning the cloth
The cloth can be machine washed in warm water (60˚C). Do not iron, tumble dry or bleach. For heavy soiling, soak the cloth in warm water and detergent or a mild stain remover to restore whiteness. Allow to dry completely before using or storing.
Cleaning the Eco Jet interior
To clean the boiler, fill with tap water, then shake and empty. Repeat two or three times as required.
Note: This should be done every three months
Cleaning the Eco Jet exterior
To clean the exterior of the unit, wipe it over with a damp soft cloth and wipe dry.
Note: Do not use cleaning detergents or chemicals to clean the exterior of the unit as these will damage its surface.
11
