J |
|
| J Remove the following parts from the carton: |
|
|
|
|
| |
|
|
| One FRONT BASKET | .......(22) |
|
|
| One PUSH BUTTON IGNITER | .......(26) |
|
|
| Two MAIN ELECTRODE WIRES | .......(26b) |
|
|
| Push the MAIN ELECTRODE WIRES (26b) onto the main burner electrodes, located under the | |
|
|
| bottom casting. |
|
|
|
| Thread the Main Electrode Wires through the igniter hole in the Control Panel. Push the round | |
|
|
| connecters onto the round and flat pins on the PUSH BUTTON IGNITER (26). See detail J1. | |
|
|
| Snap the Push Button Igniter into the Control Panel. Test: A | spark should appear at electrode |
|
|
| tip. |
|
26b |
|
| If the spark does not appear. |
|
|
|
| ||
|
|
| ||
| 26b | - Check the wire connections to the Igniter. |
| |
|
| |||
|
| |||
|
| - Check the wire connections to the main burner electrodes. | ||
|
|
| ||
Hook the FRONT BASKET (22) Into the front panel. See detail J2.
J2
J1
26
22
(Pg. 9)
