Sunbeam SMW730 instruction manual Pre-set Function, Inquiring Function, Child Safety Lock Function

process of pre-setting, memory cooking programs is set at the same time, only cooking programs can be recorded and the pre-set time will not be recorded.

17. Pre-set Function

(1)Set a certain cooking procedure(one block or two),the setting method and display is same as relevant cooking procedure.(Defrosting is beyond pre-set cooking).

(2)Press " CLOCK " to display the current clock, "clock" indicator will light the higher hour indicator will be flashing, ":" and other "0" 's will light.

(3)Press the numerical pads to input higher hour, the lower hour will flash;

(4)Press the numerical pads to input lower hour, the higher minutes will flash;

(5)Press the numerical pads to input higher minutes, the lower minutes will flash;

(6)Press the numerical pads to input lower minutes, and press " START "

to confirm the pre-set cooking. The oven will then turn back to the clock displaying state, and the clock indicator ":" will flash.

(7)When the pre-set time is reached, two "beep" will sound denoting the beginning of the cooking.

Note: The clock must be set before the pre-set cooking. If the cooking program has not been saved and only the pre-set time have been programmed, the oven can only be used as an alarm clock and five "beep" will be sound when the pre-set time is reached.

18. Inquiring Function

(1) In clock state, press " AM/PM " to display "AM/PM" for 3 seconds.

In cooking state, press " CLOCK ", the LED will display clock for three seconds and the "AM/PM" for another 3 seconds.

(2)In pre-set state, the LED will display the clock and the seconds will be flashing at the same time. Press " AM/PM " and "AM/PM" will be displayed for 3 seconds. Then press

" CLOCK " to inquire the pre-set time. The pre-set time will be flashing for 3 seconds, then "AM/PM" will be displayed for another 3 seconds. After that, the oven will turn back to the clock state.

(3)In the level 1 cooking state, press " POWER " to inquire microwave power level, and the current microwave power will be displayed. After three seconds, the oven will turn back

to the previous state.

(4)In the level 2 cooking state, the inquiring way can be done by the same way as above.

19.Child Safety Lock Function

Lock: In waiting state, press " STOP " for 3 seconds, there will be a long "beep" denoting

the entering into the children-lock state; meanwhile, LED will display " "

Lock quitting: In locked state, press "STOP" for 3 seconds, there will be a long "beep" denoting that lock is released.

15