TURNTABLE INSTALLATION
Hub(underside)
Glass tray 
Turntable shaft
a.Never place the glass tray upside down.The glass tray should never be restricted.
b.Both glass tray and turntable ring assembly must always be used during cooking.
c.All food and containers of food are always placed on the glass tray for cooking.
d.The glass tray rotates clockwise; this is normal.
e.If glass tray or turntable ring assemly cracks or breaks, contact your nearest authorized service center.
Turntable ring assembly
Installation
Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged.
Countertop
Cabinet: Remove any protective film found on the cabinet surface.
Do not remove the light brown Mica cover that is screwed to the oven cavity to protect the magnetron.
Installation
1.Select a level surface that provide enough open space for the intake and/or outlet vents.
12 inch(30cm) |
|
3.0 inch(7.5cm) | OPEN |
3.0 inch(7.5cm) |
|
A minimum clearance of 3.0 inch (7.5cm) is required between the oven and any adjacent wall.One side must be open.
(1)Leave a minimum clearance of 12inch (30cm) above the oven.
(2)Do not remove the legs from the bottom of the oven.
(3)Blocking the intake and/or outlet openings can damage the oven.
(4)Place the oven as far away from radios and TV as possible.Operation of microwave oven may cause interference to your radio or TV reception.
2.Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other
8
