Kathrein UFS 710si, UFS 710sw FIRST INSTALLATION Single-cable system Manual, Selection “EXR 552”

FIRST INSTALLATION: Single-cable system (Manual)

Selection “EXR 552”

When the “EXR 552” single-cable switching matrix is being used, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of two transmission channels are available (1400 and 1516 MHz).

Test connection

When you have set a free transmission channel, press the buttons to switch to the “Test Connection”

selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Press the  button to acknowledge this display. Then press the  button. You will be asked whether

you wish to save the changes. Use the  buttons to select “Yes, save changes” and confirm by pressing

the  button. Now press the ! (green) button.

The receiver will automatically display the selection menu for the channel search. Continue by selecting the item (Execute Channel search).

If no connection to the single-cable system could be established, you will receive the message:

Check your settings and if necessary call for expert help.

26