regulations to reduce the risk of fire, electric shock and injury to persons.
Do not attempt to wire your own new outlets or circuits. To reduce the risk of fire, electric shock or injury to persons, always use a licensed electrician.
WARNING
The supplied mounting bracket is designed for use with Dimplex wall mounted fireplaces only. Improper use, or use for purposes other than intended, may cause damage or injury.
SAHARA FIREPLACE
INSTALLATION
WARNING
Failure to install the Sahara fireplace as instructed below may result in damage to the equipment and or may expose the user to the risk of fire, serious injury, illness or death.
WARNING
The Sahara fireplace requires the wall mounting bracket screws to be installed into a minimum of two wall studs. (FIGURE 1)
1.Select an appropriate location to mount the unit on a wall, above an electrical outlet. The bottom of the unit must be a minimum of 12" above the floor (mounting bracket 34" above the floor). Access to the electrical outlet must be maintained. Ensure the installation meets the national and state/ provincial electrical codes.
4
