BULB REPLACEMENT INSTRUCTIONS:
1.Unplug the unit from the outlet.
2.Remove glass assembly as shown in figure 5.
3.Reach in and turn the
4.Replace with new bulbs.
5.Fit glass assembly back in place.
6.Plug in the Sahara fireplace.
GLASS CLEANING
The front glass is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the front glass may collect dust particles, these can be removed by dusting lightly with a clean dry cloth.
To remove fingerprints or other marks, the glass can be cleaned with a damp cloth. The glass should be completely dried with a lint free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the glass surface.
SAHARA FIREPLACE SURFACE CLEANING
To remove fingerprints or other marks, the exterior finish can be cleaned with a damp cloth with a mild detergent. The surface should be completely dried with a lint free cloth to prevent water spots.
To prevent scratching, do not use abrasive cleaners or spray liquids on any surface.
12
