Dimplex 6903950000 manual

Figure 1

NOTE: It is recommended that the bottom of the unit not be mounted higher than 40" from the ground (mounting bracket no higher than 62").

WARNING

Ensure the front of the installed unit will be at least 3 feet (0.9m) from combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains.

2.The wall-mounting bracket must be mounted to at least two wall studs. Studs should be accessed through two wall-bracket holes in one of the following combinations: A&F, B&D, or C&E (FIGURE 2).

Figure 2

NOTE: Wall anchors must be installed in the appropriate wall locations to fasten the wall bracket through the remaining holes (Figure 4). For example, if you plan to secure the bracket to studs through holes A&F, install anchors centered on holes B, C, D, and E.

3.Hold the wall-mounting bracket on the wall and mark the location of ONE of the mounting holes.

4.Place the bubble level onto the top of the wall- mounting bracket.

5