Kathrein UFS 710sw, UFS 710si FIRST INSTALLATION General, Picture format, TV-SCART-Output, System

FIRST INSTALLATION: General

Picture format

Here you select the type of screen display, depending on the setting of your TV format:

-TV format “4:3”: Pan & Scan or Letterbox

-TV format “16:9”: Always 16:9 or automatic

TV-SCART-Output

Select the type of video signal at the TV Scart socket here. Select the signal that your TV set can process.

-CVBS – Colour Video Baseband Signal

-RGB – Red/Green/Blue signal or

-Y/C – S-Video signal (luminance/chrominance)

Press the ! (green) button to move to the next menu.

The following display appears:

System

Select the setting here to match your reception system using the  buttons. You have the following options:

-DiSEqC™1.0

-One Cable

-Simple LNB

If your reception system is DiSEqC™-capable, at “System” select “DiSEqC™1.0” (allows switch-over from receiving one satellite to receiving another one). If your reception system is not DiSEqC™-capable, select the setting “Simple LNB”. If your receiver is connected to a single-cable system, select “One Cable”.

Press the  button to move to the next menu item.

Continue with the relevant section of First Installation

15