Kathrein UFS 710si manual FIRST INSTALLATION Single-cable system, Number of Satellites, LNB Type

FIRST INSTALLATION: Single-cable system

Use the  buttons here to select “One Cable” as the “System”. Press the  button to move to the next menu item. The following display appears:

The various options for a single-cable system with Kathrein components are summarised at the end of this manual in the “Technical Appendix” section under “Examples of single-cable systems”.

Number of Satellites

Use the  buttons to select how many satellites (max. 2) you would like to receive with your reception system. Press the  button to move to the next menu item.

Configure satellites

Press the  button to call up the menu. The following display appears:

Satellite and Position

Usescreen.the buttons to select the first satellite (satellite 1 of 2, depending on the setting) as shown on the

LNB Type

Here use the buttons to select the LNB type used in your system. The choice is between “Universal”, “Wideband” and “User-defined”.

If in your reception system you use a single-cable LNB (e.g. UAS 481 from Kathrein), please select here the setting “Wideband”. If you use a single-cable matrix (EXU 908) or a single-cable switching matrix (EXR 501, 551, 552, 1581 or 2581) from Kathrein, the LNB you use must be a “Universal LNB”!

20