SAVE THESE INSTRUCTIONS
As required by UL the following statements must be incorporated in the User Manual for Safety:
a.This appliance should be serviced only by qualified service personnel. Contact nearest authorized service facility for examination, repair, or adjustment.
b.Either: i) When cleaning surfaces of door and oven that comes together on closing the Door, use only mild, nonabrasive soaps or detergents applied with a sponge or soft cloth, or ii)When separate cleaning instructions are provided. See door surface cleaning instructions on (specific page or section to be included).
UNPACKING INSTRUCTIONS
Carefully remove oven from carton.
•SAVE THE CARTON AS IT MAY MAKE INSTALLATION EASIER.
Remove:
1.All packing materials from inside the oven cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the ceiling in the oven cavity. Check to see that there are Installation Instructions, Wall Template, Top Cabinet Template, bag of Installation Hardware, Charcoal Filter and Exhaust Damper Assembly. Read enclosures and SAVE the Owner’s Instructions.
2.The feature sticker from the outside of the door, if there is one.
Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surfaces, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact your dealer.
See Installation Instruction for more details.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING – Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
ELECTRICAL REQUIREMENTS
The electrical requirements are a 120 volt 60 Hz, AC only, 20 amps. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a
EXTENSION CORD
1.If it is necessary to use an extension cord, use only a
2.Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
RADIO OR TV INTERFERENCE
Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave oven is on a different circuit, relocate the radio or TV as far away from the oven as feasible or check position and signal of receiving antenna.
Notes:
If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person. Neither Sunbeam nor the dealer can accept any liability for damage to the oven or personal injury resulting from failure to observe the electrical connection procedures.
5