Using your Compact Oscillating Ceramic Heater
1.Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.The power on light and LCD screen will illuminate.
NOTE: When the heater is switched on it will be automatically set to the Standby mode.
4.Press the mode button to select the desired setting, as follows. Each time you press the mode button it will scroll through the various settings.
LOW | – low heat setting |
HIGH | – high heat setting |
AUTO | – for operating the electronic |
| thermostat |
FAN | – for fan only operation |
| without heat |
STANDBY | – the heater remains inactive |
| when in this mode |
NOTE: The fan speed will not change when the mode is changed from low to high.
5.To switch the heater off, press the mode button until the standby mode is set and switch the power off at the power outlet.
Setting the electronic thermostat
The electronic thermostat allows you to set the precise temperature. Once the desired temperature level is reached the heater will cycle on and off to maintain it.
1.Press the mode button until the AUTO mode is displayed. The LCD screen will display the ambient room temperature.
2.Set the desired temperature by turning the thermostat dial. The selected temperature will appear on the LCD screen.
NOTE: The temperature range is from 15ºC to 30ºC.
3.When the room temperature reaches the set temperature the heater will automatically turn off. The fan will continue running for 15 seconds to cool the heater. The unit will only turn on when the room temperature falls below the preset temperature.
NOTE: It is normal for the heater to cycle on and off as it maintains the preset temperature. To prevent the unit from cycling, raise the thermostat setting.
6
