Sunfire TGA-7200(E), TGA-7400(E) manual Specifications TGA-7400

Models: TGA-7400 TGA-7200(E) TGA-7400(E) TGA-7200

1 20
Download 20 pages 10.06 Kb
Page 18
Image 18

APPENDIX

Specifications

TGA-7400

Power output

400 watts continuous, per chan- nel, into eight ohms, at 1 kHz with no more than 0.5% T.H.D.

Power at clipping, min

800 watts per channel into four ohms.

Hum and Noise

-118 dB, A-Weighted

Maximum output current

120 amps peak to peak per ch.

Maximum output voltage

56.6 Vrms

Output impedance Front Left and Right channels

Voltage source: Approx. zero ohms

Current source: Approx. one ohm

RCA Input impedance:

24 k

Input sensitivity for rated output

Unbalanced: 1.9 Vrms

Balanced: 0.95 Vrms

XLR Input impedance:

10 k, each leg balanced to ground

Female XLR

Pin 1 is ground Pin 2 is positive (hot)

Pin 3 is negative (cold)

Damping Factor:

150

18

12 VDC Trigger Inputs

Input voltage range 5 -18 VDC

Impedance: approx 600 (20 mA @ 12 V)

Removable terminal block, and dual 1/8" minijacks for daisy-chain- ing.

Power Consumption

45 W

At idle

580 W

Typical (1/8th power)

1800 W

Absolute Max (Fuse

 

Limit)

Dimensions and Weight

17.0 inches wide

5.9inches high (including feet)

16.7inches deep (to tips of con- nectors)

Weight 40 lbs

Finish

Brushed aluminum with black an- odize or a light titanium finish.

TGA-7200

Power output

200 watts continuous, per chan- nel, into eight ohms, at 1 kHz with no more than 0.5% T.H.D.

Power at clipping, min:

400 watts per channel into four ohms.

Hum and Noise

-115 dB, A-Weighted

Maximum output current

80 amperes peak to peak per channel

Maximum output voltage

40 Vrms

Output impedance Front Left and Right channels

Voltage source: Approx. zero ohms

Current source: Approx. one ohm

RCA Input impedance

24 k

Input sensitivity for rated output

Unbalanced: 1.34 Vrms

Balanced: 0.67 Vrms

XLR Input impedance

10 k, each leg balanced to ground

Female XLR

Pin 1 is ground

Pin 2 is positive (hot) Pin 3 is negative (cold)

Damping Factor:

150

12 VDC Trigger Inputs

Input voltage range 5 -18 VDC

Impedance: approx 600 (20 mA @ 12 V)

Removable terminal block, and dual 1/8" minijacks for daisy-chain- ing.

Power Consumption

45W

At idle

280W

Typical (1/8th power)

1800W

Absolute Max (Fuse

 

Limit)

Dimensions and Weight

17.0 inches wide

5.9inches high (including feet)

16.7inches deep (to tips of con- nectors)

Weight 34 lbs

Finish

Brushed aluminum with black an- odize or a light titanium finish.

© 2006 Sunfire Corporation.

All rights reserved. Sunfire Corpora- tion reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.

Manual part # : 913-135-00 Rev A

User's Manual

Page 18
Image 18
Sunfire TGA-7200(E), TGA-7400(E) manual Specifications TGA-7400