Sunrise Medical 98000 manual Set up in Four Easy Steps

A unique overhead portable track system for the Voyager lift that can be set up in less than 5 minutes by one person using no tools.

•Multi-Post Options The 2, 3 or 4 post options allow the Easytrack to solve lifting and transferring problems

in nearly every room layout.

•Easy Set-UpThe lightweight components and design allow for quick, easy set-up by a single person in less than five minutes.

•Non-Permanent Installation The unique floor-to-ceiling spring-loaded design does not require permanent installation or alterations to the ceiling or electrical, thus saving the homeowner considerable money while maintaining the décor of the home.

•Portable The lightweight aluminum Easytrack can be transported along with the Voyager lift providing

a temporary solution when traveling. An optional carry bag is available.

•Small Footprint The small feet of the Easytrack allow use even in the smallest bedroom or bathroom where a conventional floor lifter could not be maneuvered.

•Easy-Glide Rail The design of the telescopic rail allows caregivers to smoothly glide the person being transferred without strain or risk of back injury.

•Telescopic Rail Unlike fixed-length tracks, the Easytrack can be extended to accommodate different locations, eliminating the need for in-home surveys and customization.

•Telescopic Post The Easytrack can be used with ceiling heights from 7'-9'.

•Rotating Rail Connection This allows the rail or post to be positioned at any angle as well as close to walls or obstructions.

•Patented Safety Systems A number of unique safety systems have been designed into the Easytrack to ensure peace of mind. These include preventing the post from losing grip if the floor or ceiling flexes, preventing the post from being lowered if the rail is still connected and preventing the rail from disconnecting from the post.

•Bubble Level A snap-on level is included for precise post set-up.

Extend posts and rotate to lock into place.

Fix one end of rail onto post.

Extend rail to required length and fix rail onto second post.

Fix end cap to lock rail into place.

Set up in Four Easy Steps