The Penny and Giles Pilot + control pod
Power supply
Ensure the power lead is connected correctly into its socket on the rear of the control pod (Fig. 27).
The immobiliser plug
When this is activated the chair will not function, other than the hazard warning light system. This may be useful if you wish to leave your wheelchair unattended (Fig. 27).
To activate the immobiliser
1.Switch the chair on via the On/ Off button (Fig. 28).
2.Insert the immobiliser plug into the charger/programmer socket located on the front of the control pod.
3.Remove the plug after
4.Your chair should now be immobilised.
To de-activate the immobiliser
1.Switch the chair on via the On/ Off button (Fig. 28).
2.Insert the immobiliser plug into the charger/programmer socket located on the front of the control pod.
3.Remove the plug after
4.Your chair should now be ready to use.
Immobiliser | Charger / |
plug | programmer |
| socket |
Fig. 27
On/Off button
Fig. 28
F45 Issue 6 | 20 |
|
|
