I X . S E T - U P , A D J U S T M E N T & U S E

I X . S E T - U P , A D J U S T M E N T & U S E

P.SEAT REMOVAL (CONTOUR & HIGHBACK CONTOUR SEATS)

1.Remove Seat

a)Remove safety lock-out pin (A).

b)Pull down both the right and left release buttons.

c)Flip seat back and remove.

2.Replace Seat

a)Position rear of seat on docking mount.

b)Rotate seat forward until latches lock the seat in place.

c)Replace the safety lock-out pin under the left release lever.

Always replace the safety lock-out pin to prevent inadvertent release of the seat.

Q. SHROUD REMOVAL

The plastic protective shroud can be removed for adjustment or servicing.

1. Remove Shroud

a) Remove deck lid (B). Deck lid is held

by two pieces of Velcro and one piece

A

D C

c)Replace screws and tighten. Important Note: If there is any difficulty in re-attaching the screws, try using a probe to help line up the holes.

S.SEAT DEPTH (SEAT FRAME AND CONTOUR SEATS ONLY) The seat depth can be adjusted in one inch increments.

1.Seat Frame Depth Adjustment

a)To adjust, remove the two bolts (A) from each side of the backrest pivot plate.

b)Reposition the backrest to the desired position.

c)Replace and retighten bolts on each side of the backrest pivot plate.

2.Contour Seat Depth Adjustment

a)Remove bolts (B) on the seat hingeplate.

b)Adjust the set back to desired position.

c)Refasten bolts (B) in appropriate location.

T.CHECK-OUT

Once the wheelchair is assembled and adjusted, it should roll smoothly and easily. All accessories should also perform smoothly. After the wheelchair has been set up be

A

B

 

of Poly Lock (plastic locking Velcro).

b)

Remove four (4) quarter-turn fasteners

 

(C) by turning them 1/4 turn and

 

removing.

c)

Lift shroud from a central point.

2. Replace Shroud

B

sure the chair performs to your specified operational settings (see pages 36- 39). If the chair does not perform to specifications, turn the wheelchair OFF immediately and reprogram operational specifications using the QTRONIX Programming Pad.

Repeat this procedure until the wheelchair performs to specifications before

a)Replace shroud by repositioning shroud on base frame and align the holes with the frame fasteners.

b)Secure 1/4 turn fasteners.

c)Install deck lid and press firmly with thumb at D using support with your forefingers in pocketed area under lid.

R.PARAPAK SEAT SLING (SEAT FRAME)

The seat sling tension can be adjusted through use of the VELCRO® retaining material beneath the seat.

1.Adjustment

a)Remove the screws retaining the left side seat sling.

b)Readjust VELCRO® style material to increase the tension in the seat sling.

attempting active use of the wheelchair.

If you have any problems, follow these procedures:

1.Review the Set-up, Adjustment & Use section and Operating Guide to make sure chair was properly prepared.

2.If your problem persists, contact your authorized supplier. If you still have a problem after contacting your authorized supplier, contact Sunrise customer service. See the introduction page for details on how to contact your authorized supplier or Sunrise customer service.

930484 Rev. A

34

35

930484 Rev. A

Page 17 Page 19
Page 18
Image 18
Sunrise Medical G-424 Seat Removal Contour & Highback Contour Seats, Shroud Removal, Parapak Seat Sling Seat Frame
Page 17 Page 19

G-424 specifications

The Sunrise Medical G-424 is a state-of-the-art manual wheelchair that showcases the perfect blend of functionality, comfort, and advanced technology. Designed for users who demand versatility and performance in their mobility solutions, the G-424 stands out due to its impressive features that cater to a wide range of individual needs.

One of the hallmark features of the G-424 is its lightweight frame, constructed from high-strength aluminum, which enhances both durability and portability. Weighing significantly less than traditional wheelchairs, the G-424 allows for easier transport and maneuverability, making it an excellent choice for users who lead an active lifestyle. The folding design adds convenience, enabling the wheelchair to fit comfortably in car trunks or storage spaces.

The G-424 is equipped with ergonomic seating systems that ensure a comfortable experience during prolonged use. The adjustable seat depth and height make it customizable to meet individual comfort requirements, while the breathable upholstery promotes airflow and helps regulate body temperature. This attention to user comfort is essential for enhancing the overall experience and encouraging longer days out and about.

Stability and safety are paramount in the design of the G-424. The wheelchair features a rigid frame that significantly reduces flex during movement, providing a stable base that supports confident navigation. Moreover, the G-424 comes with robust anti-tippers that enhance safety on inclines and declines, giving users peace of mind as they navigate various terrains.

Incorporating advanced technologies, the G-424’s wheel and tire system enhances both performance and usability. The quick-release wheels make it easy to transport and store, while the puncture-resistant tires ensure reliability and independence, reducing maintenance concerns for users. The wheelchair also employs height-adjustable armrests, which can be customized for maximum support.

In terms of aesthetics, the G-424 offers a range of color options and stylish designs, allowing users to express their personality while maintaining a reliable mobility solution. The combination of features and thoughtful engineering makes the Sunrise Medical G-424 not just a wheelchair, but a reliable companion for users seeking independence and life quality enhancement on their daily journeys. Whether it’s for day-to-day errands or recreational activities, the G-424 is built to meet the demands of modern life while prioritizing user comfort and safety.
Top Page Image Contents