10

 

 

 

 

 

V

.

 

E

M

I

 

(

E

l

e

c t

r

o

m

a

g

n e

t

i

c

 

I

n

t

e r

f

e

r

e

n

c e

)

 

C. SOURCES OF EMI

The sources of EMI fall into three broad types:

1. Hand-Held Transceivers:

The antenna is usually mounted directly on the unit. These include:

Citizens band (CB) radios

“Walkie-talkies”

Security, fire and police radios

Cellular phones

Lap-top computers with phone or fax

Other personal communication devices

NOTE– These devices can transmit signals while they are on, even if not in use.

2. Medium-Range Mobile Transceivers:

These include two-way radios used in police cars, fire trucks, ambulances and taxi cabs. The antenna is usually mounted on the outside of the vehicle.

3. Long-Range Transceivers:

These include commercial radio and TV broadcast antenna towers and

amateur (HAM) radios. NOTE– The following are not likely to cause EMI problems: Lap- top computers (without phone or fax), Cordless phones, TV sets or AM/FM radios, CD or tape players.

D. DISTANCE FROM THE SOURCE

EM energy rapidly becomes more intense as you get closer to the source. For this rea- son, EMI from hand-held devices is of special concern. (See C.1 above) A person using one of these devices can bring high levels of EM energy very close to your chair without you knowing it.

E.IMMUNITY LEVEL

1.The level of EM is measured in volts per meter (V/m). Every power wheelchair can resist EMI up to a certain level. This is called its “immunity level”.

2.The higher the immunity level, the less the risk of EMI. It is believed that a

20 V/m immunity level will protect the power wheelchair user from the more common sources of radio waves.

3.The configuration tested and found to be immune to at least 20 V/m is: Quickie P-222 SE power wheelchair with a right-hand mounted QTRONIX remote joystick system, 18" seat width, 18" seat depth, dual post height adjustable armrests, fixed tapered legrests with one piece solid footplate, and Gp 24 gel cell batteries.

 

 

V .

E

M

I

 

(

E

l e

c

t

r

o

m

a

g

n

e

t

i

c

 

I

n

t e

r

f

e

r

e

n

c

e

)

 

 

 

 

 

11

4.The following specialty input devices have an unknown effect on the immunity level because they have not been tested with the P-222 SE and QTRONIX control system:

•Breath Control

Proportional Head Control

•Tri-Switch Head Array

Proportional Mini-Joystick/Chin Control

•Heavy Duty Switched Joystick

• Buddy Button

•Treadle Switch

Micro Light

•Ribbon Switch

Star Board

•Proximity Head Array

Wafer Board

•Zero Touch Switch

Penta Switch

•4-Zero Touch Switch

Plate Switch

•5-Zero Touch Switch

Soft Switch

•Disc Switch

Grasp Switch

•Wobble Switch

 

 

Individuals with physical limitations requiring the use of a specialty control input device known not to be immune to 20V/m, or not known, should exer- cise extra care around known sources of EMI.

There is no way to know the effect on EMI if you add accessories or modify this chair. Any change to your chair may increase the risk of EMI. Parts not specifically tested or parts from other suppliers have unknown EMI properties.

F. REPORT ALL SUSPECTED EMI INCIDENTS

You should promptly report any unintended movement or brake release. Be sure to indicate whether there was a radio wave source near your chair at the time. Contact:

Sunrise Medical, Customer Service Department at (800) 333-4000.

G. EMI FROM CHAIR

The chair itself can disturb the performance of electromagnetic fields such as emitted by alarm systems of shops.

930476 Rev. A

930476 Rev. A

Page 6
Image 6
Sunrise Medical P-222 SE Sources of EMI, Distance from the Source, Immunity Level, Report ALL Suspected EMI Incidents