3.2 Code and Learn Setting Key
3.2 Code and Learn Setting Key
SRC-3000b is equipped with two functions, pre-code and Learning Function, to get the right codes for your target devices.
Pre-Code
You may configure all keys on SRC-3000b by entering a specific four-digit code number. This may be the fastest way to program the SRC-3000b. To get the specific code number, please refer to the supplied pre-programmed code list.
However, it requires that the device you intend to program is included in the pre-programmed code database. Some newer or less-common devices may not be pre-programmed, and their codes must be learned by using the Learning Function.
Learning Function
You can use this function to learn the IR codes directly from another remote control. This function is perfect for newer or less common devices. You can also use the function if a certain key does not perform the desired function after using the CODE function.
However, if you have the problem that the SRC-3000b cannot learn your device codes, please refer to “Troubleshooting” on page 36 or contact SUNWAVE.
