Chapter 4 Miscellaneous Settings
This chapter will tell you how to use transmission function, setup the backlight, and adjust the beep.
4.1 Using the Transmission Function
The
NOTE:
Before using this function to transfer data, you must connect two
1.Press and hold 
for 3 seconds to enter the confirmation screen. You only need to operate on the programmed
2.Press each number button (2, 4, 6, 8) in any order until they disappear and start to use the function.
3.Press 
and 
to select the icon 
. And then press 
to begin the transmission.
4.During the transmission, the LCD displays blank keys as shown in the illustration on the next page.
27
