from
The addresses of the solar inverter must be input in the solar inverter using the Sunways NT Monitor software or input directly with the keys illustrated on page 107.
·Attention! Do not initialise the local modem!
·The remote modem is now initialised
so that it automatically accepts a connec- tion after two rings and connects at 9600 Baud.
Initialising the remote modem
If a remote modem is installed in the solar inverter, it must be initialised using a PC and the Sunways NT Monitor software.
·Connect the powered remote modem to the PC via the COM port. Use the inter- face cable provided with the modem for this purpose. Start the Sunways NT Monitor and set «Acer Modem» under the «Settings/Remote Modem» menu.
·Click «Perform initialisation» and wait until the scroll bar has come to an end.
The modem can now be switched off |
|
and connected to the solar inverter via |
|
the RS 232 interface. | 114 |
