SUPER MICRO Computer 5010E, 5010H user manual Checkpoint Code Description

SUPERSERVER 5010H/5010E Manual

Checkpoint		Code Description
60h	The DMA page register test passed. Performing the DMA Controller 1
	base register test next.
62h	The DMA controller 1 base register test passed. Performing the DMA
	controller 2 base register test next.
65h	The DMA controller 2 base register test passed. Programming DMA
	controllers 1 and 2 next.
66h	Completed programming DMA controllers 1 and 2. Initializing the 8259
	interrupt controller next.
67h	Completed 8259 interrupt controller initialization.
7Fh	Extended NMI source enabling is in progress.
80h	The keyboard test has started. Clearing the output buffer and checking
	for stuck keys. Issuing the keyboard reset command next.
81h	A keyboard reset error or stuck key was found. Issuing the keyboard
	controller interface test command next.
82h	The keyboard controller interface test completed. Writing the command
	byte and initializing the circular buffer next.
83h	The command byte was written and global data initialization has
	completed. Checking for a locked key next.
84h	Locked key checking is over. Checking for a memory size mismatch
	with CMOS RAM data next.
85h	The memory size check is done. Displaying a soft error and checking
	for a password or bypassing WINBIOS Setup next.
86h	The password was checked. Performing any required programming
	before WINBIOS Setup next.
87h	The programming before WINBIOS Setup has completed.
	Uncompressing the WINBIOS Setup code and executing the
	AMIBIOS Setup or WINBIOS Setup utility next.
88h	Returned from WINBIOS Setup and cleared the screen. Performing any
	necessary programming after WINBIOS Setup next.

B-6