5-14

SUPERSERVER 5010H/5010E Manual
5-8 Connector Definitions

Power Supply Connector

The primary power supply connec-
tor on the 370SSR+/370SSE+ is
designated as ATX POWER. This
is a 20-pin connector. Attach an
ATX power supply cable to J29 by
aligning the tab on the connector.
(Refer to the table on the right for
pin definitions.)
ATX Power Supply 20-pin Connector
Pin Definitions
Pin Number Definition
1 +3.3V
2 +3.3V
3 Ground
4 +5V
5 Ground
6 +5V
7 Ground
8 PW-OK
9 5VSB
10 +12V
Pin Number Definition
11 3.3V
12 -12V
13 Ground
14 PS-ON
15 Ground
16 Ground
17 Ground
18 -5V
19 +5V
20 +5V

Infrared Connector

The infrared connectors are lo-
cated on pins 1-5 of J45 for the
370SSR+/370SSE+. (Refer to the
table on the right for pin defini-
tions.) See the Technical Support
section of our web page for infor-
mation on the infrared devices you
can connect to the system.
Pin
Number
1
2
3
4
5
6
Definition
+5V
Key
IRRX
Ground
IRTX
*
NC
J45
Infrared Pin Definitions

Chassis Intrusion

The Chassis Intrusion header is
located on JL1 See board layout
for the location. (See the table on
the right for pin definitions.)
(JL1)
Pin
Number
1
2
Definition
Intrusion
Input
Ground
Chassis Intrusion Pin Definitions
(*Note: NC indicates "no connec-
tion".)