SUPERSERVER
B-2 Installing Windows on Non-RAID Systems
1.Insert Microsoft's Windows XP/2003 Setup CD in the CD drive and the sys- tem will start booting up from the CD.
2.Press the <F6> key when the message "Press F6 if you need to install a third party SCSI or RAID driver" displays.
3.When the Windows XP/2003 Setup screen appears, press "S" to specify ad- ditional device(s).
4.Insert the driver diskette you want to install into Drive A: and press the <En- ter> key.
5.Press the <Enter> key to proceed with the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are specified, press the <Enter> key to continue with the installation.
6.From the Windows XP/2003 Setup screen, press the <Enter> key. The XP/2003 Setup will automatically load all device files and then continue with the Windows XP/2003 installation.
7.After the Windows XP/2003 OS installation is complete, the system will auto- matically reboot.
8.Insert the Supermicro Setup CD that came with your system into the CD drive during system boot, and the main screen shown on page