SUPER MICRO Computer AOC-R1UG-IBQ manual Firmware Update Procedures

Chapter 3: Installation

3. Double-click to run and install the driver package file.

Firmware Update Procedures

Use the following procedures for updating the AOC-R1UG-IBQ add-on card firmware for both the Linux and Windows operating systems.

Updating Firmware for the Linux Operating System

1.From the CDR-NIC LAN driver CD or FTP site, go to the following directory:

MELLANOX Æ FIRMWARE_TOOL Æ LINUX.

2.Choose the MFT Linux package file and untar the package file.

3.Install the package by the following command:

cd mft-<ver>

./install.sh

4.Install the firmware by the following commands: mst start

mst status *note down the pci_cr0 device name*

flint –d <pci_cr0 device name> -i <firmware file name>.bin b

Upadating Firmware for the Windows Operating System

1.From the CDR-NIC LAN driver CD or FTP site, go to the following directory:

MELLANOX Æ FIRMWARE_TOOL Æ WINDOWS.

2.Choose the desired MFT Windows package file.

3.Double-click to run and install the MFT package file.

4.Open up the DOS Command Prompt and locate the MFT folder.

5.Install the firmware by the following commands:

mst	start
mst	status	*note down the pci_cr0 device name*

flint –d <pci_cr0 device name> -i <firmware file name>.bin b

3-3