Fujitsu 620C user manual Replacing The Adf Snap-In Pad Module, Disassembling Procedure

3.3REPLACING THE ADF SNAP-IN PAD MODULE

After scanning approximately 150,000 pages through the ADF, the pad spring may be worn out and you may experience problems with document feeding. In this case, it is highly recommended to replace the pad module with a new one. For ordering the pad module, please consult your nearest dealer and follow the procedure below to replace it.

Disassembling Procedure

1.Open the ADF front cover by depressing the ADF release button.

2.Remove the ADF snap-in pad module by pulling out the upper part of the pad clamp as shown in Figure 3-3.

Upper Part of ADF Pad Clamp

ADF Unit

ADF

Cover

ADF Release

Button

Figure 3-3 Remove the pad module

3-4