3.MAINTENANCE
3.1CLEANING THE ADF
Your Scanner is designed to be maintenance free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance.
From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case the scanner may not feed documents smoothly or several documents may feed at once. If this occurs please follow the cleaning procedures to return your Scanner to its original state.
The cleaning procedures (Figure
i). | Moisten a cotton swab with isoprophyl alcohol (95%). (Cleaner kits are available from |
| Fujitsu.) |
ii). | Open the ADF unit by depressing the button • in front of the ADF unit, carefully open the |
| ADF to the left ‚. Wipe the feeding rollers by moving the swab from side to side. Rotate |
| the rollers forward with your finger and repeat the above cleaning procedures until the |
| rollers are clean. Be careful not to snag or damage the pick springs. |
iii). | Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs. |
iv). | Close the ADF unit. Your Scanner is now ready for use. |
