Question: While scanning, the Scanner often makes noises, or it scans back and forth.
Answer: Please choose lower speed from the TWAIN user interface for low speed PC.
Question: The scanned image always comes out to be too dark.
Answer: a) Use your application to modify the Gamma setting to 2.2 and 1.8 for your printer and monitor respectively.
b) Use Brightness setting from the TWAIN user interface to get a brighter
image.
Question: The Scanner works well otherwise, but for the line art, the lines of which seem much thicker than those of the original.
Answer: Use the Brightness or Threshold setting to adjust the line art image.
4.2 | PAPER JAM IN THE ADF |
In the event of paper jam, please follow the procedures below. | |
i). | Press the ADF Release Button at the front left of the Scanner as shown in Figure |
| ADF cover will be released. |
ii). | Open the ADF cover to the full open position as shown in Figure |
iii). | Pull the paper out of the ADF unit carefully. |
ADF Cover
ADF Release Button
