Fujitsu 620C user manual Connecting the Cable, Turning the Power Off, Ii. Turning the Power On

2.7 CONNECTING THE CABLE

i). Turning the Power Off

Depress the side marked “O” to turn the power off.

Connect the power cable and SCSI signal cable as shown in Figure 2-8 and Figure 2-9.

ii). Turning the Power On

Depress the side marked “I” to turn the power on. The POWER LEDwill light. If not, please

check the power source.

iii). SCSI Termination

The Fujitsu ScanPartner 620C comes complete with a built in SCSI terminator. If the Scanner is the last device in a SCSI chain the terminator should be switched on. If the Scanner is not the last device the terminator should be off. The terminator on/off switch is located on the back of the Scanner, to the left of the SCSI cable connectors.

Host PC

Term.

Scanner

SCSI Device

Term.

(Terminator Off)

Host PC

Scanner

Term.

(Terminator On)

2-9