Fujitsu 620C user manual ADF Output Tray, Install the ADF Output Paper Tray

2.4	ADF OUTPUT TRAY
i).	Hold the output paper tray some 30 degrees aslant as shown in Figure 2-5.
ii).	Insert the three protrusions on the output paper tray to the three slots on the ADF.
iii).	Release the paper tray gently. Make sure the tray is firmly attached to the ADF.
iv).	Pull out the output paper tray extension wire to the desired length.
	Protrusions
	ADF Output Tray
	Extension

Figure 2-5 Install the ADF Output Paper Tray

2-6