5-2

AS1041M-T2/1041M-82 User's Manual
!
5-2 Processor and Heatsink Installation

Installing the Processor (must populate two or four CPU sockets)

CPU Backplates

Two CPU backplates (BKT-0011L) have been preinstalled to the serverboard to
prevent the CPU area of the serverboard from bending and to provide a base for
attaching the heatsink retention modules.
Exercise extreme caution when handling and installing the proces-
sor. Always connect the power cord last and always remove it be-
fore adding, removing or changing any hardware components.
1. Begin by removing the cover plate
that protects the CPU. Lift the lever on
the CPU socket until it points straight
up. With the lever raised, lift open the
silver CPU retention plate.
2. Use your thumb and your index
fi nger to hold the CPU. Locate and
align pin 1 of the CPU socket with pin
1 of the CPU. Both are marked with
a triangle.
Triangles