5-4
AS1041M-T2/1041M-82 User's Manual
Installing the Heatsink
The use of active type heatsinks (except for 1U systems) are recommended. Con-
nect the heatsink fans to the appropriate fan headers on the serverboard. To install
the heatsinks, please follow the installation instructions included with your heatsink
package (not included).
Installing the Heatsink Retention Modules
Two heatsink retention modules (BKT-0012L) and four screws are included in the
retail box. Once installed, these are used to help attach the heatsinks to the CPUs.
To install, align the module with the standoffs of the preinstalled CPU backplate and
with the four feet on the module contacting the serverboard. Secure the retention
module to the backplate with two of the screws provided. See Figure 2-1. Repeat for
the second CPU socket. Note: BKT-0012L is included for use with non-proprietary
heatsinks only. When installing proprietary heatsinks, only BKT-0011L (the CPU
backplate) is needed. The BKT-0012L retention module was designed to provide
compatibility with clip-and-cam type heatsinks from third parties.
Figure 2-1. CPU Heatsink Retention Module Installation