5-6
AS1041M-T2/1041M-82 User's Manual
Figure 5-1. Front Control Panel Header Pins (JF1)
Connecting the Control PanelJF1 contains header pins for various fro nt control panel connectors. See Figure
5-1 for the pin locations of the various front control panel buttons and LED indi-
cators. Please note that even and odd numbered pins are on opposite sides of
each header.
All JF1 wires have been bundled into single keyed ri bbon cable to simplify their
connection. The red wire in the r ibbon cable plugs into pin 1 of JF1. Connect
the other end of the cable to the Contro l Panel printed circuit board, located just
behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip -
tions of JF1.
NMI
x (key)
Vcc
Vcc
Vcc
Vcc
Vcc
Vcc
PB UID
Power
Ground
x (key)
Power LED
HDD LED
NIC1
NIC2
OH/Fan Fail LED
Power Fail LED
UID LED
Ground
2 1
20 19
Note: NMI is not supported on the H8QM8-2+ or the H8QME-2+.