Chapter 6: Advanced Chassis Setup

6-5

Accessing the Drive Bays
SATA/SCSI Drives: Because of their hotswap capability, you do not need to access
the inside of the chassis or power down the system to install or replace SATA or
SCSI drives. Proceed to the next section for instructions.
DVD-ROM/Floppy Disk Drives: For installing/removing a DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the 1041M-T2/1041M-82 by re-
moving the top cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive
Installation" section later in this chapter for instructions.
Note: Only "slim" DVD-ROM and fl oppy drives will fi t into the 1041M-T2/1041M-
82.
Figure 6-3. Removing the Front Bezel
1. Unlock
2. Press release knob
3. Remove bezel assembly