X7SLM-L User's Manual

2.Use the speaker to determine if any beep codes exist. (Refer to Appendix A for details on beep codes.)

3.Remove all memory modules and turn on the system. (If the alarm is on, check the specs of memory modules, reset the memory or try a different one.)

Memory Errors

1.Make sure that the DIMM modules are properly installed and fully seated in the slots.

2.You should be using unbuffered Non-ECC DDR2 667/533/400 memory (See the next page). Also, it is recommended that you use the memory modules of the same type and speed for all DIMMs in the system.

3.Check for bad DIMM modules or slots by swapping modules between slots to see if you can locate the faulty modules.

4.Check the power supply voltage 115V/230V switch.

Losing the System’s Setup Confi guration

1.Please be sure to use a high quality power supply. A poor quality power supply may cause the system to lose the CMOS setup information. Refer to Section 1-5 for details on recommended power supplies.

2.The battery on your motherboard may be old. Check to verify that it still supplies ~3VDC. If it does not, replace it with a new one.

3.If the above steps do not fi x the Setup Confi guration problem, contact your vendor for repairs.

3-2 Technical Support Procedures

Before contacting Technical Support, please make sure that you have followed all the steps listed below. Also, Note that as a motherboard manufacturer, Supermicro does not sell directly to end users, so it is best to fi rst check with your distributor or reseller for troubleshooting services. They should know of any possible problem(s) with the specifi c system confi guration that was sold to you.

1.Please go through the ‘Troubleshooting Procedures’ and 'Frequently Asked Question' (FAQ) sections in this chapter or see the FAQs on our website (http://www.supermicro.com/support/faqs/) before contacting Technical Support.

2.BIOS upgrades can be downloaded from our website at (http://www.supermicro. com/support/bios/).

3-2

Page 54
Image 54
SUPER MICRO Computer x7slm-l Technical Support Procedures, Memory Errors, Losing the System’s Setup Confi guration

x7slm-l specifications

Super Micro Computer Inc., commonly known as Supermicro, has been a prominent player in the server and high-performance computing markets. Among its extensive product range, the X7SLM-L motherboard stands out as an ideal solution for both server and workstation applications. Equipped with cutting-edge technology, the X7SLM-L caters to a variety of user demands, including scalability, reliability, and compatibility.

The Supermicro X7SLM-L motherboard is built on an Intel Socket 775 platform, offering support for multi-core Intel processors, including the Xeon series. This enables users to harness the processing power necessary for demanding applications like virtualization, database management, and scientific computations. The board can accommodate up to 8 GB of DDR2 memory, which is essential for memory-intensive tasks, ensuring smooth and efficient performance.

One of the standout features of the X7SLM-L is its support for PCI Express 2.0, allowing for enhanced graphics and expansion capabilities. Users can easily integrate high-performance add-on cards, which are crucial for fields such as video editing, gaming, and CAD applications. Furthermore, the motherboard comes with multiple SATA ports, offering exceptional flexibility for storage configurations. With support for RAID levels 0, 1, 5, and 10, users can ensure data protection and improve performance.

Another important characteristic of the X7SLM-L is its embedded network controller, which provides high-speed connectivity options to meet the needs of data center environments. With integrated dual Gigabit Ethernet, users can take advantage of redundancy and load balancing, crucial for maintaining uptime in critical applications.

Supermicro's commitment to energy efficiency is also evident in the X7SLM-L design. The motherboard supports Intel’s SpeedStep technology, providing dynamic adjustment of CPU voltage and frequency according to workload requirements, thus reducing power consumption and heat generation.

In summary, the Supermicro X7SLM-L motherboard is a versatile and feature-rich platform designed for users who require high performance and reliability. With support for advanced Intel processors, substantial memory capacity, flexible storage options, and energy-efficient technologies, the X7SLM-L stands as an excellent choice for a wide range of computing applications. Whether for server deployments or demanding workstation tasks, this motherboard provides a solid foundation for next-generation computing needs.