Congratulations!

In selecting this SUPERIOR Direct-Vent Gas Appliance you have chosen the finest and most dependable fireplace to be found anywhere. A beautiful, prestigious, alternative to a wood burning fireplace. Welcome to a Family of tens of thousands of satisfied SUPERIOR Fireplace Owners.

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The Care and Operation Instructions included here will assure that you have many years of depend- able and enjoyable service from your SUPERIOR product.

Provide adequate clearances around air open- ings and adequate accessibility clearance for service and proper operation. Never obstruct the front openings of the appliance.

These appliances are designed to operate on natural or propane gas only. Do not use any other fuels. The use of other fuels, or combi- nation of fuels, will degrade the performance of this system and may be dangerous.

TABLE OF CONTENTS

 

 

Introduction

Page

2

General Information

Page

2

Gas Controls Access

Page

3

Operation / Care of Your Appliance....

Page

4

Variable Flame Adjustment

Page

4

Maintenance

Page

5

Front Glass Enclosure Panel,

 

 

Removal and Installation

Page

6

Install Volcanic Stone,

 

 

Embers & Logs

Page

7

Burner Flame Appearance & Sooting Page

9

Burner Flame Adjustments

Page

9

Millivolt Appliance Checkout

Page

10

Electronic Appliance Checkout

Page

10

Wiring Diagrams

Page 11

Warranty

Page 11

Product Reference Information

Page

11

Accessory Components

Page 13

Lighting Instructions – Millivolt

Page

16

Lighting Instructions – Electronic

Page

18

Maintenance Schedule

Page 20

Troubleshooting Guide – Millivolt

Page

21

Troubleshooting Guide – Electronic...

Page

22

Replacement Parts List

Page

23

Introduction

The Fireplace models covered in this manual are Direct-Vent sealed combustion gas fireplace heaters designed for residential application. Direct-Vent appliances operate with the com- bustion chamber completely isolated from the indoor environment. All air for combustion is brought in from the outside and exhaust gases are vented through the same direct vent, co-axial (intake/exhaust) vent system.

The Millivolt appliances have a millivolt gas control valve with piezo ignition system provides safe, efficient operation. If any optional acces- sories which require electrical power are being installed, the electrical power must be provided at the time of appliance installation.

The Electronic appliances have an electronic intermittent pilot system provides safe, efficient operation. External electrical power is required to operate these appliances.

These appliances comply with National Safety Standards and are tested and listed by Omni-Test Laboratories (Report No. 116-F-29-5) to ANSI Z21.88 (in Canada, CSA-2.33), and CAN/CGA- 2.17-M91 in both USA and Canada, as vented gas fireplace heaters.

The Installation must conform to local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54-latest edition, or the Natural Gas and Propane Installation Code, CSA B149.1-latest edition. The appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, the latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1 - latest editions.

General Information

Note: Installation and repair should be per- formed by a qualified service person. The appliance should be inspected annually by a qualified professional service technician. More frequent inspections and cleanings may be required due to excessive lint from carpeting, bedding material, etc.

It is imperative that the control compartment, burners and circulating air passage ways of appliance be kept clean.

S'assurer que le brùleur et le compartiment des commandes sont propres. Voir les instructions d'installation et d'utilisation qui accompagnent l'appareil.

These fireplaces are designed as supplemen- tal heaters. Therefore, it is advisable to have an alternate heat source when installed in a dwelling.

Millivolt Models - BTU Input

Millivolt models come standard with the manu- ally-modulated gas valve; flame appearance and heat output can be controlled at the gas valve. The BTU Input for millivolt models is shown

in Table 1:

Input (BTU) Manually-Modulated Gas Valves (millivolt models)

NATURAL & PROPANE GAS

Models

Input Rate (BTU / HR)

 

 

SSDVT/R-3328

17,500 high

13,500 low

 

 

 

Table 1

Electronic Models -

Electronic models have a fixed rate gas valve. The BTU Input for electronic models is shown in Table 2:

Electronic Models with Fixed Rate Gas Valve

Natural and Propane Gas

Model Series

Input Rate (BTU / HR)

 

 

SSDVT/R-3328

17,500

Table 2

Gas Pressure - All Models

Tables 3, 4 and 5 show the appliances' inlet gas pressure requirements:

Inlet Gas Supply Pressure

(all models)

Fuel #

Minimum

Maximum

Natural Gas

5.0" WC

10.5" WC

(1.24 kPa)

(2.61 kPa)

 

 

 

 

Propane

11.0" WC

13.0" WC

(2.74 kPa)

(3.23 kPa)

 

 

 

 

Table 3

Page 2
Image 2
Superior SSDVT-3328CNM manual Table of Contents

SSDVT-3328CNM specifications

The Superior SSDVT-3328CNM is a cutting-edge solid-state drive designed to elevate storage solutions for both personal and professional applications. This model stands out in a saturated market due to its impressive performance metrics, advanced technologies, and robust durability features.

One of the key highlights of the SSDVT-3328CNM is its exceptional read and write speeds. With sequential read speeds exceeding 3500 MB/s and write speeds reaching 3000 MB/s, this SSD allows for rapid data access and transfer, making it an ideal choice for gamers, content creators, and IT professionals. Whether you are booting up your operating system, loading large files, or running demanding applications, the drive’s speed ensures minimal wait times and improved overall efficiency.

The SSDVT-3328CNM utilizes the NVMe 1.3 interface, which harnesses the full potential of the PCIe 3.0 architecture. This interface facilitates a direct connection between the storage medium and the CPU, eliminating bottlenecks that traditional SATA connections often encounter. As a result, users experience faster file transfers, quicker application launches, and improved responsiveness in multitasking scenarios.

In terms of capacity, the SSDVT-3328CNM features a range of options, including 256GB, 512GB, and 1TB variants, allowing users to select the size that best fits their specific storage needs. The drive's 3D NAND flash technology enhances data durability and reliability. With this technology, memory cells are stacked vertically in a three-dimensional structure, which not only increases storage density but also improves endurance by reducing wear on individual cells.

Reliability is another critical aspect of the SSDVT-3328CNM. Designed with built-in error correction and wear leveling algorithms, this SSD ensures data integrity and prolongs the lifespan of the device. Additionally, with thermal throttling capabilities, the SSD can manage heat effectively, preventing performance dips during demanding tasks.

Security features include AES 256-bit hardware encryption, safeguarding sensitive data against unauthorized access and ensuring compliance with data protection regulations. This makes the Superior SSDVT-3328CNM particularly suitable for business environments.

In summary, the Superior SSDVT-3328CNM combines high performance, cutting-edge technology, and robust security features, making it an excellent choice for anyone in need of reliable and fast storage solutions. Whether for gaming, professional use, or everyday computing, this SSD delivers a cutting-edge experience that meets the demands of modern users.