SVSound™ |
Port Tuning
Advanced Features: Port Tuning (Ported Subwoofers Only)
Your new SVS ported subwoofer comes with custom foam port plugs and a variable subsonic filter which allows your sub to be “tuned” to even lower frequencies than its stock configuration. For most people and most rooms, the sub is already configured for the best blend of extension (how deep and how low your sub goes) and output (how loud it will play). How- ever, bass is a very personal and subjective taste, and no two rooms will react exactly the same with any subwoofer.
There are some compromises when tuning a sub lower than its standard configuration. Installing one port plug takes some capacity from the upper reaches of bass but will allow the subs to play at lower frequencies. Installing three port plugs effectively configures your sub to a sealed configuration, including the lower frequency roll off going from 24 dB per octave (ported) to 12 dB per Octave (sealed). Again the tradeoff is output versus extension. Let your ears be your guide.
To insert one or three port plugs, first remove the grill. The box sub grill is attached magnetically and will pull off easily. The cylinder sub grill can be pried off using your fingers or a small flat blade screwdriver (gently!) around the edges of the grill, slowly working it off around the entire perimeter. After the grill has been removed, take a port plug and squeeze the foam on one end and press the plug into the port flare. The plug should be recessed ¾” to 1” into the mouth of the port.
To remove a port plug, insert your fingertips into the port flare, squeezing and pulling on the foam plug at the same time.
FIG. 11
To avoid potentially damaging your subwoofer, be sure to select the proper subsonic filter setting that coincides with your new subwoofer’s tuning point. The subsonic filter is adjusted using the “Subwoofer Tune” function accessible by using the Integrated Function Controller (IFC) on your
NOTE: It is strongly recommended you do NOT run a lower subsonic filter point than your port plug configura- tion would dictate. Failure to properly align Subwoofer Tune and port plug configuration can potentially result in serious damage to your subwoofer, especially if run at higher sound pressure levels.
© 2011 Specialty Technologies, LLC • Call SVSound™ 877.626.5623 • www.svsound.com
26
