Hook up the phone line between the wall socket, CID100 and Phone set.
1.Unplug the phone line from wall socket and plug this one into "TEL" of the CID100.
2.Plug one end of the provided wire into wall socket and other end into "Line" of the CID100.
3.Lift handset to hear dial tone, if not, unplug and plug all wires or check with local dealer.
Plug the provided AC adapter into wall socket and its DC plug into CID100.
OPERATION
System is ready to work, " reset " unit and turn power on . (general mode)
1.Use a sharp point to reset CID100, which is located at the bottom of the unit near to battery's lid.
2.When resetting, on the TV screen appears "Version … please wait…" and later changes "no Video signal" and "total 000 new 000" and "VIP 00 ".
3.During review mode or name mode or function mode, press Quit key to back to general mode.
Adjust time, date, area code, background color and language.(function mode)
1. During general mode, Press Function key of remote control. TV screen shows text of date, hour, area ..etc and arrow locates in front of date. Press Up and Down key to bring arrow up and down.
2.When arrow is in front of the text, press Enter key to enter setting mode. The text will flash.
3.Use Up, Down key to select and press Enter key to confirm and move to right and Enter to finish. Or press Quit to abort the setting.
4.Press Quit key to shift from function mode back to general mode.
Once all setting are done, then press Quit key to back to general mode.
5.TV screen's background color can be green, blue or black.
6.There are several languages for selection.
6
